Greenhouse Primaterra Premium 3х10х2,1м.

The base of the Primaterra Premium greenhouse is made of double zinc-coated (inside and outside) tube with a rectangular profile of 40 * 20 * 1 mm. The distance between the beams is 67 centimeters. The greenhouse has 2 doors with extra windows on each. The greenhouse coverage is made of 4 mm thick polycarbonate boards and UV (ultraviolet) protection from the sun's rays. The polycarbonate coating has several advantages: strength, ultraviolet rays, low thermal conductivity (like glass), double wall, use over 10 years. The welded base can withstand 180 kg of snow. per square meter. This means that the greenhouse covered with polycarbonate excels in the snowy winter. It is not necessary to remove the polycarbonate in winter. The zinc coating of the beams perfectly protects them against corrosion. Thanks to this, the Primaterra Premium greenhouse will serve you for many years without the need for additional anti-corrosion treatments. The greenhouse can be extended without limitation with 2-meter sections. Extending it can take place at any time. It is possible to install an additional dormer. The ladder has an automatic opening and closing mechanism depending on the temperature. The greenhouse can be installed in the soil or on a foundation.

Type of construction: arch
Type of  profile: square
Profile cross section: 40x20 mm
Profile Thickness: 1 mm
Material made of: galvanized steel profile
Beam spacing: 67 cm
Mounting method: in the ground, installation on a foundation
Fastening of polycarbonate: self-tapping screws with rubber seal and washer
Maximum snow load: 180 kg / m2
Width: 3 m
Height: 2.1 m
Length: 10 m
Set
Doors: 2 pcs
Door windows: 2 pcs
Roof skylights optional
Possibility of extension: yes
Coating included
Coverage
Type of  coating: polycarbonate 4 mm