Grey granite pavers 10×10×8 cm with two cut faces are natural stone pavers suitable for yards, driveways, parking areas, paths and entrance zones around houses. The 8 cm thickness is suitable for paving exposed to light vehicle traffic when installed on a properly constructed load-bearing base.

The pavers have a cut and flame-textured top face and a cut bottom face, providing a consistent thickness and easier levelling during installation. The four side faces remain naturally split, so dimensional variations of around 2–3 cm and uneven joint widths should be expected.

The granite has a light grey colour with natural darker markings, which vary in size, shape and position from piece to piece. The flame-textured top provides a matt, rough surface suitable for outdoor paving.

Approximately 1 ton contains around 454 pavers and covers about 4.54 m², while the finished paving weighs around 220 kg/m². Installation on a properly prepared crushed-stone base with suitable edge restraint is recommended.

Advantages

• Natural grey granite
• Approx. size 10×10×8 cm
• 8 cm thickness
• Cut and flame-textured top face
• Cut bottom face
• Four naturally split side faces
• Light grey with darker natural markings
• Suitable for light vehicle traffic
• For yards, paths and parking areas
• Installation on crushed-stone base
• Approx. 220 kg/m²
• 1 ton ≈ 454 pcs ≈ 4.54 m²

Technical Specifications